Beiträge von liftmys10
-
-
The 'Sound' outputs of Servonaut ESCs have another format than receivers.The SMT 'understands' both formats: Servonaut and standard pulse format (PWM) of receivers.
In order to switch between these formats, there's a jumper called 'Servonaut/Others' at the SMT.The BMA instead, mandatorily needs the Servonaut format.
It simply ignores normal pulse signals of receivers...I see. Thank you for that explanation. I just tried bypassing the BMA. So my new setup is currently going from the S20 receiver/servo wire, y-connected to the SMT "ServoN/Gas" directly. I have disconnected the jumper C for Servonaut/Other. This is now identical setup to the youtube video previously posted with the exception of using an S20 vs. Hobbyking esc. This should work now right? I can not start the engine noise at all, I can only make the horn sound. Any suggestions on how to start the engine noise?
-
I know, but the "Sound" leads on my S20 is missing/broken off.
The "Sound" leads should be the same as the S20 servo wire going to the receiver right?
So why wouldn't a y-connector work?
If i had a HobbyKing esc, how would I connect that to the SMT? I would use a y-connector to get signal from the receiver right?Watch this video at the 5:23 mark. It will explain what I'm trying to say regarding the y-connector.
Externer Inhalt youtu.beInhalte von externen Seiten werden ohne Ihre Zustimmung nicht automatisch geladen und angezeigt.Durch die Aktivierung der externen Inhalte erklären Sie sich damit einverstanden, dass personenbezogene Daten an Drittplattformen übermittelt werden. Mehr Informationen dazu haben wir in unserer Datenschutzerklärung zur Verfügung gestellt. -
Also worth mentioning, my S20 does not have a separate lead for sound module as shown in the attached picture. I am using a servo Y-connector that attaches the S20 and BMA together, then connects to the receiver. I assume using a Y-connector won't be an issue since the BMA or SMT just needs the signal input from the receiver? This would be the same way as connecting to a non-servonaut ESC.
-